| |
|
WRC-4 Mounting Boards
|
|
|
|
|
WRC4-
A8H
|
The WRC4-A8H mounting
backplane can be used with up to eight WRC4-series I/O modules. The
terminal blocks both accept insulated wire with stripped ends or ferrules.
Each power side point is individually isolated. The signal side has a
common DC return and a common logic supply bus (+Vcc) for negative-true
logic applications. Logic side connections are via a
50-conductor header connector.
They are designed for panel mounting with four
stand-offs. Specify WRC4-A8H-DIN for mounting on DIN rails.
|
|
|
|
|
WRC4- A16H
|
|
The WRC4-A16H mounting backplane can
be used with up to sixteen WRC4-series I/O modules. The terminal blocks
both accept insulated wire with stripped ends or ferrules.
Each power side
point is individually isolated. The signal side has a common DC return and
a common logic supply bus (+Vcc) for negative-true logic applications. Logic side connections are via a
50-conductor header connector.
They are designed for panel mounting with four
stand-offs. Specify WRC4-A16H-DIN for mounting on DIN rails.
|
|
|
|
|
WRC4- A24H
|
|
The WRC4-A24H mounting backplane can
be used with up to twenty four WRC4-series I/O modules. The terminal blocks
both accept insulated wire with stripped ends or ferrules.
Each power side
point is individually isolated. The signal side has a common DC return and
a common logic supply bus (+Vcc) for negative-true logic applications. Logic side connections are via a
50-conductor header connector.
They are designed for panel mounting with stand-offs.
|
|
|
|
