|    Sitemap    |    Contact Us    
 

Modbus RTU Analog Input Products

Modbus Product Finder
D1000M Series   D5000M Series D6000 Series   D8000 USB Series

 
 
 
D1000M Modbus Analog Input IO Module Product Family

The D1000M provide direct connection to a wide variety of sensors to any host with an RS232 or RS485 port. The modules perform all signal conditioning, scaling, linearization, and A/D conversion. They each contain some discrete digital I/O lines and can measure signals such as:


The D1000M series easily mount on DIN-Rails using the MK-1 mounting kit.
  D5000M Modbus Analog Input Module Product Family

The D5000M provide direct connection to four analog signals of the same type and range to any host with an RS-232 or RS-485 port. The modules perform all signal conditioning, scaling, linearization and A/D conversion. They measure signals such as:

  D5000M Input Types  
  Voltage Inputs  
  4-20mA Current Inputs  
  Thermocouple Inputs  
Thermistor Inputs

The D5000M series easily mount on DIN-Rails using the MK-1 mounting kit.
  D6000 Modbus Analog and Digital I/O Module Product Family

The D6000 series provides a differential measurement connection to seven analog signals to any host RS-485 serial port. The module performs all signal condition, linearization and A/D conversion. They measure signals such as:

  D6000 Signal Types   
  Voltage Inputs  
  4-20mA Current Inputs  
  Thermocouple Inputs   
  Analog Outputs   
  Digital I/O   

The D6000 series are easily mounted on DIN-Rails using the MK-1 mounting kit. 
  D8000 Modbus Analog Input Module Product Family

The D8000 USB interface modules are a complete family of data acquisition modules for use in process control systems. These modules can measure process signals such as DC voltage, thermocouples and 4-20mA current loops. 

  D8000 Signal Types  
  Voltage Inputs  
  4-20mA Current Inputs  
  Thermocouple Inputs  
  Analog Outputs  
  Digital I/O  

The D8000 series easily mount on DIN-Rails using the MK-1 mounting kit.

Modbus RTU Analog and Digital I/O Products

D3000M Analog Outputs   D1700M Digital I/O DIN-100 Modbus Series   Software Compatibility

 
 
 
D3000M Modbus Analog Voltage and Current Output Modules

The DGH D3000M DAC series are complete digital to analog output modules. They communicate, in Modbus RTU protocol, with RS232 and RS485 serial ports. Modbus RTU commands are used to control a 12-bit DAC (Digital to Analog Converter) which is scaled to commonly used current and voltage ranges.

  D3000M Analog Outputs  
  Voltage Outputs  
  Current Outputs  

The combination of an accurate high-resolution DAC and a dedicated microprocessor produces a very powerful intelligent interface between the host and the DAC.  See data sheet for details.
  1700M Series Modbus Compatible Digital I/O Modules

The DGH 1700M series provide computer monitoring and control of devices through solid-state relays or TTL signals. The status of digital inputs and outputs is communicated to the host in either Modbus RTU or DGH ASCII format using RS232 or RS485 serial communications. The 1700M series includes:

You can string up to 247 boards / modules on one twisted pair of wires using RS485 and repeaters in Modbus RTU format. When using RS232 in Modbus format you can use one board/module per serial port. The 1700M series allows a single computer to monitor and control thousands of I/O points. The 1700M series is compatible with all industry standard I/O relay modules and mounting boards. See data sheet for details.
  DIN-100 Modbus Analog Input Module Product Family
The DIN rail mounted DIN-100 modules convert analog input signals to digital data and transmit via RS-485 to a controller which may be a computer or other processor-based equipment. They measure analog signals such as:


  Labview Block Diagram using Modbus Driver and DGH Module!

The DGH Modbus I/O modules are compatible with all commercial software programs and OPC servers that support the Modbus RTU protocol. Commercials software programs from Kepware, MatrikonOPC, Iconics, DreamReport, Wonderware, Intellution, National Instruments LabVIEW, DAQFactory and Dasylab all support the Modbus RTU protocol.

Low Cost Datalogger

Create a low cost datalogging system using either a DGH D6000 or D8000 series module and free AzeoTech DAQFactory Express software!
Modbus Protocol Overview
 
 
Modbus Products
ASCII Products
Accessories
Support
Purchase
Company  
  D1000M Series
  D1700M Series
  D3000M Series
  D5000M Series
  DIN-100 Series
  D6000 Series
  D7000 Series
  D8000 Series
  D1000 Series
  D1700 Series
  D2000 Series
  D3000 Series
  D4000 Series
  D5000 Series
  Mounting Backplanes
  Module Accessories
  Serial Converters
  USB Converter
  Power Supplies
  Software
  Cables
  FAQ's
  Data Sheets
  Diagrams
  User Manuals
  Product Finder
  Modbus Support
  Contact Support
  Product Warranty
  How to Buy
  Shop Online
  International
  View Shopping Cart
  About Us
  Contact Us
  Policies
  Sitemap
  Blog
  Join our Email List

          
 
 
Copyright Dutile, Glines & Higgins Corporation,
All Rights Reserved.