|
| |
|
|
A3000
Serial to Ethernet
Converter
|
|
|
|
The
A3000 Serial
to Ethernet converter connects an RS-232/422/485 serial port to a 10/100Base-T Ethernet network running TCP/IP. The
serial to Ethernet converters provide an easy and economical way to monitor and control data from any
location via the Internet.
The A3000
Serial to Ethernet converter easily connects any serial device, such
as a DGH module, to the World Wide Web without any modification of the user’s software. It allows any host computer access to the serial port as a virtual COM port via an IP address. The included software automatically finds A3000
Serial to Ethernet converters in the network and allows the
converter to be configured via WEB browser or the serial port.
There are several ways to use an A3000 with DGH modules. The Serial
to Ethernet configuration guide assists users in getting started and
connecting it to DGH modules. Also,
a Serial
to Ethernet Application Note is available that describes ways to use the A3000 with DGH modules.
Disclaimer:
1. This product is not manufactured in the U.S.A.
2. Effective
January 1st, 2012 this
product contains a Male DB-9 connector.
3. A3000 users who have a DB-9 Female Connector can
click here for proper
documentation.
|
|
| |
| MK-1
|
| The
MK-1 Mounting Kit allows any A3000 Serial to Ethernet converter
to be mounted directly onto a DIN Rail. The MK-1 contains four
screws and two DIN Rail mounting clips that can be easily
attached to an A3000. |
|
|
|
MK-1 |
|
|
|
| |
| CA-6 |
| The
CA-6 Ethernet cable can be used to connect an A3000 Serial to Ethernet
converter to a Ethernet Hub, Switch or other Ethernet hardware.
The CA-6 is approximately 3 feet long and contains an RJ-45
connector on each end. |
|
|
|
CA-6 |
|
|
|
| |
|
|
| |
|
|
|
