|
|
|
DIN-190 RS232/RS485 Converter/Repeaters
|
|
| The
DIN-191 and DIN-192 are an RS232/RS485 converter and an RS485 repeater. |
| |
|
DIN-191
The DIN-191 module
transparently converts RS232 signals to those required by RS485 at all
standard baud rates from 300 to 115.2K baud. Internal control circuitry
automatically controls the flow of data on the RS485 bus. Therefore, the
DIN-191 does not require external handshaking signals.
The DIN-191 is
optically isolated from the RS232 input to the RS485 output by up to
500VAC and contains internal biasing and termination resistors for the
RS485 bus.
|
|
|
|
|
DIN-192
The DIN-192 module
transparently repeats RS485 signals at all standard baud rates from 300 to
115.2K baud. Internal control circuitry automatically controls the flow of
data on the RS485 bus. Therefore, the DIN-192 does not require external
handshaking signals.
The DIN-192 is optically
isolated by up to 500VAC and contains internal biasing and termination
resistors for each RS485 port.
|
|
|
|
| Model |
Description |
Purchase |
| DIN-191 |
DIN Mount RS-232/RS-485 Converter |
 |
| DIN-192 |
DIN Mount RS-485 Repeater |
|
| |
|
|
| Use
With: |
|
|
| CA-2 |
Serial
Cable, 9 Pin-M to 9 Pin-F |
|
| PS-1 |
+5.0Vdc
@ 5.0 amps
85-265VAC,
DIN Mount Switching Supply
|
|
| PS-2 |
+5.0Vdc
@ 2.0amps
100-240VAC,
Wall Mount Power Supply
|
|
|
