DGH Data Acquisition - DIN-150 Bridge Input Modbus Modules

DIN-150 Bridge Input Modbus Modules

The DIN-150 Bridge input Modbus modules convert analog input signals to digital data and transmit via RS-485 using the Modbus RTU protocol for communication. The modules provide a wide variety of ranges and perform all signal conditioning, scaling, linearization and conversion to either linearized ASCII data values or Modbus percent of full scale binary values.

Specifications:
	Ranges: +/-30mV, +/-60mV.
	Accuracy: +/-0.05% of F.S. max.
	Resolution: 10uV (mV spans), 0.02% of F.S. on V span.
	Common mode rejection: 100db at 50/60 Hz.
	Excitation voltage: 5V, 10Vdc @ 60mA max.
	Input burnout protection to 30Vdc.
	Offset Control: Full input range.
	Zero drift: +/-1uV/deg C max.
	Span tempco +/-50ppm/deg C max.

Typical RS-485 Bridge Input Module

DIN Documentation Links

Mechanical Dimensions

Download Utility Software

Application Software

Bridge Measurement Modules:
DIN-151	30mV Bridge Input, 5V Excitation/RS-485
DIN-152	30mV Bridge Input, 10V Excitation/RS-485
DIN-153	100mV Bridge Input, 5V Excitation/RS-485
DIN-154	100mV Bridge Input, 10V Excitation/RS-485

Accessories:
Kepware	Kepware OPC Software
CA-2	Serial Cable, 9 Pin-M to 9 Pin-F
DIN-191	RS-232 to RS-485 Converter
PS-1	+5.0Vdc @ 5.0 amps 85-265VAC, DIN Mount Switching Supply
PS-2	+5.0Vdc @ 2.0amps 100-240VAC, Wall Mount Power Supply