DGH Data Acquisition - DIN-120 Current Input Modbus Modules

DIN-120 Current Input Modbus Modules

The DIN-120 current input Modbus modules convert analog input signals to digital data and transmit via RS-485 using the Modbus RTU protocol for communication. The modules perform all signal conditioning, scaling, linearization and conversion to either linearized ASCII data values or Modbus percent of full scale binary values.

Specifications:
	Range: 4-20mA.
	Accuracy: +/- 0.04% of FS (4-20mA).
	Resolution: 0.04% of F.S.
	Common mode rejection: 100db at 50/60 Hz.
	Zero drift:+/-1 count max (autozero).
	Span tempco:+/-50ppm/deg C max.
	Voltage drop: +/-0.1V max.

Typical RS-485 Current Input Module

DIN Documentation Links

Mechanical Dimensions

Download Utility Software

Application Software

Current Measurement Module:
DIN-125	4-20mA Input/RS-485 Output

Accessories:
Kepware	KepServer OPC Software
CA-2	Serial Cable, 9 Pin-M to 9 Pin-F
DIN-191	RS-232 to RS-485 Converter
PS-1	+5.0Vdc @ 5.0 amps 85-265VAC, DIN Mount Switching Supply
PS-2	+5.0Vdc @ 2.0amps 100-240VAC, Wall Mount Power Supply