DGH Data Acquisition - DIN-110 Voltage Input Modbus Modules

DIN-110 Voltage Input Modbus Modules

The DIN-110 voltage input Modbus modules convert analog input signals to digital data and transmit via RS-485 using the Modbus RTU protocol for communication. The modules provide a wide variety of ranges and perform all signal conditioning, scaling, linearization and conversion to either linearized ASCII data values or Modbus percent of full scale binary values.

Specifications:
	Ranges: +/-10mv, +/-100mV, +/-1V, +/-5V, +/-10V, +/-100V.
	Accuracy:+/-0.02% of full scale.
	Resolution:0.01% of full scale.
	Common mode rejection: 100db at 50/60 Hz.
	Zero drift:+/-1 count max (autozero).
	Span tempco:+/-50ppm/deg C max.
	Input impedance: <=1V FS=100 megohm min, >=5V FS=1 megohm min.

Typical RS-485 Voltage Input Module

DIN Documentation Links

Mechanical Dimensions

Download Utility Software

Application Software

Voltage Measurement Modules:
DIN-110	+/-10mV Input/RS-485 Output
DIN-111	+/-100mV Input/RS-485 Output
DIN-112	+/-1V Input/RS-485 Output
DIN-113	+/-5V Input/RS-485 Output
DIN-114	+/-10V Input/RS-485 Output
DIN-115	+/-100V Input/RS-485 Output

Accessories:
Kepware	KepServer OPC Software
CA-2	Serial Cable, 9 Pin-M to 9 Pin-F
DIN-191	RS-232 to RS-485 Converter
PS-1	+5.0Vdc @ 5.0 amps 85-265VAC, DIN Mount Switching Supply
PS-2	+5.0Vdc @ 2.0amps 100-240VAC, Wall Mount Power Supply