|
| |
| |
|
15-Bit Digital I/O Modules |
| |
The D1700 digital I/O
modules allow a host computer to control thousands of digital I/O points
from one serial port.
|
| |
| D1711
and D1712 |
| The
D1711 and D1712 Digital I/O modules contain 15 user-selectable
input/output bits. The bits can be individually programmed as digital inputs or
digital outputs. A user-programmable Initial value can be assigned to
each digital output bit, to turn "on" or "off" on
power-up.
The modules contain
a communications "watchdog" timer that can move the digital
outputs to a safe-condition in the event of a communications link
failure.
The modules contain
an Events counter that can be used to count positive transitions, from
logic "0" to a logic "1", on the B00 terminal. The
module can count pulses up to 10 million.
The D1711 contains
an RS-232 serial output and the D1712 contains an RS-485 serial output.
| Digital
Inputs |
 |
Up
to 15 Digital Inputs. |
 |
Input
Levels: 0-30Vdc. |
 |
Input
High level, 3.5V min. |
 |
Input
Low Level, 1.0V max. |
| |
| Digital
Outputs |
 |
Up
to 15 Digital Outputs. |
 |
Open-collector
to 30Vdc. |
 |
Max
Load: 100mA per bit. |
 |
VSat:
1.0Vdc @ 100mA. |
| |
| Communications |
 |
DGH
ASCII Protocol. |
 |
Baud
Rate: 300-38,400. |
 |
124
modules per port. |
 |
Parity:
Odd, Even, None. |
|
 |
|
D1711 |
|
|
|
| |
| D1701
and D1702
|
| The
D1701 and D1702 Digital I/O modules contain seven digital input and eight
digital output bits.
The digital input
bits contain internal "pull-up" resistors. Therefore, a simple
set of contacts can be applied between a digital input bit and
ground.
The modules contain
an Events counter that can be used to count positive transitions, from
logic "0" to a logic "1", on the EV input terminal.
The module can count pulses up to 10 million.
The D1701 contains
an RS-232 serial output and the D1702 contains an RS-485 serial output.
| Digital
Inputs |
 |
7
Digital Inputs. |
 |
Input
Levels: +/-30Vdc. |
 |
Input
High level, 3.5V min. |
 |
Input
Low Level, 1.0V max. |
 |
Internal
Pull up resistors. |
| |
| Digital
Outputs |
 |
8
Digital Outputs. |
 |
Open-collector
to 30Vdc. |
 |
Max
Load: 30mA per bit. |
 |
VSat:
0.2Vdc @ 30mA. |
| |
| Communications |
 |
DGH
ASCII Protocol. |
 |
Baud
Rate: 300-38,400. |
 |
124
modules per port. |
 |
Parity:
Odd, Even, None. |
|
 |
|
D1701 |
|
|
|
|
|
|
Digital
I/O Modules: |
|
D1701 |
7 Inputs, 8
Outputs, RS-232 Output |
 |
|
D1702 |
7
Inputs, 8 Outputs, RS-485 Output |
 |
|
D1711 |
15 I/O Bits, RS-232 Output |
 |
|
D1712 |
15 I/O Bits, RS-485 Output |
 |
| |
|
|
| Accessories: |
|
CA-3 |
RS-232
Serial Cable, 9 Pin-F to tin leads |
 |
|
MK-1 |
DIN-Rail
Mounting Kit |
 |
|
PS-3 |
+24.0Vdc
@ 0.42 amps
100-240VAC,
Wall Mount Power Supply |
 |
|
DasyLab |
Dasylab
Software |
 |
|
A1000-115 |
AC
Powered, 115VAC, RS-485 Converter |
 |
|
A3000-110 |
Serial
to Ethernet Converter, w/110Vac Adapter |
 |
|
A3000-220 |
Serial
to Ethernet Converter, w/220Vac Adapter |
 |
|
|