|    Sitemap    |    Contact Us    
 

Modbus Analog Input Modules - D1000M

Overview   Measurement Types   Product Photos

 
 
The DGH D1000M series data acquisition modules use the Modbus RTU protocol for communication. The D1000M are complete single-channel data acquisition systems that are well suited to applications such as SCADA, data monitoring, data loggers, PLC’s, process controllers and instrumentation. The modules convert an analog input signal to engineering units and transmit in ASCII data format to any host or PLC with RS485 or RS232 serial ports. The D1000M Modbus data acquisition series analog signal input types include Voltage, Current, Temperature, Flow, Bridge and Load Cell.

The D1000M series converts the digital signal data into engineering units using look-up tables. The resultant data is stored in a memory buffer. The module’s ADC continuously converts data at the rate of 8 conversions per second and stores the latest result in the buffer.

Using RS485 up to 247 Modbus data acquisition modules may be linked to an RS485 port or PLC. Since Modbus protocol does not support echoing D1000M RS232 modules may not be daisy-chained. This limits you to one module per RS232 serial port.

The four analog input D5000M Modbus data acquisition modules provide direct connection to four analog signals of the same type and range. ADC conversion and linearization of sensor input data and communicates in ASCII or Modbus RTU protocol via RS232 or RS485 serial connection.

DIN-100 Modbus series are low cost single channel modules that are DIN rail mountable.
 
D1100M Voltage +/-10mv, +/-100mV, +/-1V, +/-5V, +/-10V, +/-100V
D1200M Current +/-1mA, +/-10mA, 4-20mA, +/-100mA, +/-1Amp
D1300M Thermocouple J, K, T, E, R, S, B, C
D1400M RTD .00385, .00388, .00392
D1450M Thermistor 2252 Ohm, Honeywell TD Series
D1500M Bridge +/-30mV, +/-100mV, 1-6V
D1600M Frequency 1-20KHZ
D1700M Digital I/O 7 Discrete Inputs, 8 Discrete Outputs
 
Modbus Software Compatibility

The DGH Modbus I/O modules are compatible with all commercial software programs and OPC servers that support the Modbus RTU protocol. Commercials software programs from Wonderware, Intellution, National Instruments LabVIEW, and Dasylab all support the Modbus RTU protocol.

OPC Servers from Kepware and MatrikonOPC support the Modbus RTU protocol and can be used to connect with other software programs.
Labview Block Diagram using Modbus Driver! LabVIEW Block Diagram using Modbus Serial Driver
 
D1000M Series Modbus Analog Input Module DGH Module Mounted on a DIN-Rail
Modbus Module Modbus Module with MK-1
 
Documentation

  Data Sheet     Environmentals
  Users Manuals     Utility Software
  Register Map     App Software
  Modbus Functions     DIN-Rail Mounting
  Command Set     Modbus Overview
  Dimensions     LabVIEW
  
 
 
Modbus Products
ASCII Products
Accessories
Support
Purchase
Company  
  D1000M Series
  D1700M Series
  D3000M Series
  D5000M Series
  DIN-100 Series
  D6000 Series
  D7000 Series
  D8000 Series
  D1000 Series
  D1700 Series
  D2000 Series
  D3000 Series
  D4000 Series
  D5000 Series
  Mounting Backplanes
  Module Accessories
  Serial Converters
  USB Converter
  Power Supplies
  Software
  Cables
  FAQ's
  Data Sheets
  Diagrams
  User Manuals
  Product Finder
  Modbus Support
  Contact Support
  Product Warranty
  How to Buy
  Shop Online
  International
  View Shopping Cart
  About Us
  Contact Us
  Policies
  Sitemap
  Blog
  Join our Email List

          
 
 
Copyright Dutile, Glines & Higgins Corporation,
All Rights Reserved.