DGH Data Acquisition - D1100 Series Voltage Input Modules

D1100 Voltage Input Modules

The D1100 ADC module input converts analog DC voltage input signals to digital information, linearizes the digital data, scales in millivolts, and communicates the values to a host computer or PLC. The data values are transmitted in ASCII to a host computer via RS232 or RS485 .

The D1100 series modules can also be mounted on a DIN-Rail using the MK-1 mounting kit.

Typical RS-232 Voltage Module

Command Set

Power Supplies

Mechanical Dimensions

RS-232 Connection Cable

Data Sheet

Users Manual

DIN-Rail Mounting Kit

	Voltage Inputs: (+/-10mv, +/-100mV, +/-1V, +/-5V, +/-10V, +/-100V)
	Accuracy:+/-0.02% of full scale.
	Resolution:0.01% of full scale.
	Common mode rejection: 100db at 50/60 Hz.
	Zero drift:+/-1 count max (autozero).
	Span tempco:+/-50ppm/deg C max
	Input burnout protection to 250 VAC.
	Input impedance: <=1V FS=100 megohm min, >=5V FS=1 megohm min.
	Two open-collector digital outputs or (HI/LO alarms).
	One digital input/60 Hz events counter (D1100M series does not contain Events Counter).

Typical RS-485 Voltage Module