Click to Shopping Cart | Site Map | Contact Us  |   

 

 
  About Us
 
Data Acquisition
  D1000 Series
  D1000M Series
  D1700 Series
  D1700M Series
  D2000 Series
  D3000 Series
  D3000M Series
  D4000 Series
  D5000 Series
  D5000M Series
  D6000 Series
  DIN-100 Series
 
Data Converters
  A1000 Series
  A2000 Series
  A3000 Ethernet
  DIN-190 Series
  USB Series
 
Data Acquisition Software
  LabVIEW
  Dasylab
  Kepware OPC Server
  WinWedge
  Drivers
  Utility Software
  Program Samples
 
Accessories
  Backplanes
  Cables
  DIN Rail Mounting Kit
  Power Supplies
  
Follow Us
  Follow Us on Twitter
 
 
 

MK-1 DIN-Rail Mounting Kit

 

Mounting Modules

The MK-1 DIN-Rail mounting kit can be used to mount any D-Series module on a 35mm DIN-Rail, as illustrated in the picture to the right. The MK-1 comes with two DIN-Rail mounting clips that will accept the captive screws provided with every D-Series module. Simply turn the captive screws into the center hole of the mounting clips and then attach the module on to the DIN-Rail.

 
Mounting A3000's

The MK-1 DIN-Rail mounting kit can be used to mount an A3000 Series Ethernet converter on to a 35mm DIN-Rail, as illustrated in the picture to the right. The MK-1 comes with two DIN-Rail mounting clips and four screws. Simply turn the screws into the DIN clips and then snap the A3000 onto any DIN-Rail.

 
MK-1 Contents
The MK-1 Mounting Kit allows any D-Series module or A3000 Serial to Ethernet converter to be mounted directly onto a 35mm DIN Rail. The MK-1 contains four screws and two DIN Rail mounting clips. 

Click to Enlarge

Contents

Installation Instructions

 

Mounting Kit:

  MK-1

DIN-Rail Mounting Kit
 

Copyright Dutile, Glines, and Higgins Corporation, <%=right (date(),4)%>.

All Rights Reserved.

  DHTML Menu / JavaScript Menu Powered By OpenCube