|
CA-1 |
|
The CA-1 ribbon cable assembly is available to interface the DGH H1770
digital I/O card to industry standard PB-16 I/O module mounting racks. The CA-1 includes
four ribbon cables.
|
 |
| CA-1Cable |
|
|
|
|
CA-2
|
|
The
CA-2 serial cable can be used to connect a DGH A1000 or A2000
RS232/RS485 converter to a host computer that utilizes a 9 pin
female serial port connector. The CA-2 is approximately 6 feet
long, contains a 9 pin
female connector on one end and 9 pin male on the other end.
|
 |
| CA-2
Cable |
|
|
|
|
CA-3
|
|
The
CA-3 is used to connect any DGH RS232 type
module to a 9 pin host computer serial port connector. The
CA-3 is approximately 3 feet long and contains a 9 pin female connector on one end and leads on the other end.
The leads can be screwed down into the module screw terminal
connector.
|
|
| |
|
CA-6 |
| The
CA-6 Ethernet cable can be used to connect an A3000 Ethernet
converter to a Ethernet Hub, Switch or other Ethernet hardware. The
CA-6 is approximately 3 feet long and contains an RJ45 connector
on each end. |
 |
| CA-6
Ethernet Cable |
|
|
|
|
Model |
Description |
Purchase |
| CA-1 |
Cable
Assembly |
 |
| CA-2 |
Serial
Cable, 9 Pin-M to 9 Pin-F. |
|
| CA-3 |
9
Pin-F to Tin Lead for Modules. |
|
| CA-6 |
Ethernet
Cable, CAT-5, 3 ft. long. |
|
|
