|    Sitemap    |    Contact Us    
 

DGH Accessory Products

Mounting Backplanes   Serial & Ethernet Cables   DIN Rail Mounting Kit

 
 
Click to Mounting Backplanes!

The DGH module mounting backplanes reduce wiring costs by providing all the common module connections on the backplane.

Each backplane includes screw terminals for connecting sensor signals, power supply connections and the communications to the backplane.

Each backplane also includes swaged thru-hole stand offs for mounting, a hold-down bar, and holes for an RS-485 termination resistor.

There are three models available, the BP-8 and BP-14 around intended for use with RS-485 modules.  The BP-8/232 is intended for use with RS-232 modules.
  Click to Cables!

DGH offers several cables for use in connecting products to serial ports, Ethernet converters, or digital I/O relay racks.

The CA-1 ribbon cable assembly is available to interface the DGH H1770 digital I/O card to industry standard PB-16 I/O relay module mounting racks.

The CA-2 serial cable can be used to connect a DGH A1000 or A2000 RS-232/RS-485 converter to a host computer that utilizes a 9 pin female serial port connector.

The CA-3 is used to connect any DGH RS-232 type module to a 9 pin host computer serial port connector.
MK-1 Mounting Kit

The MK-1 DIN-Rail mounting kit can be used to mount any D-Series module on a 35mm DIN-Rail, as illustrated in the picture to the right.

The MK-1 comes with two DIN-Rail mounting clips that will accept the captive screws provided with every D-Series module. Simply turn the captive screws into the center hole of the mounting clips and then attach the module on to the DIN-Rail.
Power Supplies

Click to Power Supplies!

Three power supplies are available for powering up DGH products. The power supplies are available in +5Vdc and +24Vdc outputs.

The PS-1 DIN rail mountable power supply can be used to power the DGH H1750, H1770 digital products and the DIN-100 series analog input modules. The PS-1 supplies +5Vdc @ 5.0 amps and operates on AC voltage from 85-265VAC.

The PS-2 wall mount power supply can be used to power the DGH H1750, H1770 digital products and the DIN-100 series analog input modules. The PS-2 supplies +5Vdc @ 1.6 amps and operates on AC voltage from 100-240VAC.

The PS-3 wall mount power supply can be used to power the DGH D1000, D2000, D3000, D4000 and D5000 series. It can also be used with the D1701, D1702, D1711 and D1712 digital I/O modules.


 
Modbus Products
ASCII Products
Accessories
Support
Purchase
Company  
  D1000M Series
  D1700M Series
  D3000M Series
  D5000M Series
  DIN-100 Series
  D6000 Series
  D7000 Series
  D8000 Series
  D1000 Series
  D1700 Series
  D2000 Series
  D3000 Series
  D4000 Series
  D5000 Series
  Mounting Backplanes
  Module Accessories
  Serial Converters
  USB Converter
  Power Supplies
  Software
  Cables
  FAQ's
  Data Sheets
  Diagrams
  User Manuals
  Product Finder
  Modbus Support
  Contact Support
  Product Warranty
  How to Buy
  Shop Online
  International
  View Shopping Cart
  About Us
  Contact Us
  Policies
  Sitemap
  Blog
  Join our Email List

          
 
 
Copyright Dutile, Glines & Higgins Corporation,
All Rights Reserved.