DGH AC-Powered RS-232/RS-485 Converters  RS-485 Repeaters
The DGH A1000 series converter boxes convert RS-232 communications signal levels to the correct electrical signals required by RS-485. RS-485  is recommended when many DGH modules, or other addressable devices, must be connected to a host computer over long distances. The A1000 converters allow communications bus lengths up to 4,000 feet and baud rates up to 115.2K baud using one twisted pair of wires. RS-485 allows bi-directional data on the same pair of wires, therefore some means of arbitrating the data direction is required. The A1000 converters automatically control the bus direction without the need for external handshaking signals from the host computer. Therefore, host software written for half-duplex RS-232 may be used without modification. The RS-485 bus control is completely transparent to the user.	A1000 Top = Front View Bottom = Rear View CA-2
Use the CA-2 cable to connect to a host computer 9 pin serial port. The A1000 can also operate as an RS-485 repeater. RS-485 repeaters are required to extend communications bus lengths or allow more than 32 devices to be connected to a communications bus. The A1000 mechanical dimensions are: 8.08"W x 2.50"H x 6.25"D

	A1000-115 Code: A1000115 Price: $250.00 Quantity in Basket: none
	A1000-220 Code: A1000220 Price: $250.00 Quantity in Basket: none

Copyright © 2011 Dutile, Glines and Higgins Corporation. All Rights Reserved