DGH Accessories

BP-8 The BP-8 module mounting backplane reduces wiring costs by providing all common module connections on the backplane. Each backplane includes screw terminals for all analog inputs and outputs, power connections and communications signals. The backplanes also include swaged thru-hole stand offs for mounting, a hold-down bar, and holes for an RS-485 termination resistor. BP-8 Mechanical Dimensions Wiring Diagram BP-14 The BP-14 module mounting backplane reduces wiring costs by providing all common module connections on the backplane. Each backplane includes screw terminals for all analog inputs and outputs, power connections and communications signals. The backplanes also include swaged thru-hole stand offs for mounting, a hold-down bar, and holes for an RS-485 termination resistor. BP-14 Mechanical Dimensions Wiring Diagram CA-1 The CA-1 ribbon cable assembly is available to interface the DGH H1770 digital I/O card to industry standard PB-16 I/O module mounting racks. The CA-1 includes for ribbon cables.   CA-1 CA-2 The CA-2 serial cable can be used to connect a DGH A1000 or A2000 RS-232/RS-485 converter to a host computer that utilizes a 9 pin female serial port connector. The cable contains a 9 pin female connector on one end and 9 pin male on the other end. CA-2 CA-3 The CA-3 cable contains a 9 pin female connector on one end and tinned leads on the other end. Use the CA-3 to connect any DGH RS-232 type module to a 9 pin host computer serial port connector. CA-3

 

Copyright © 2011 Dutile, Glines and Higgins Corporation. All Rights Reserved